|
Architectural Spray Rings (Description):
Let your imagination create a live palette of truly unique aqua artistry. With
a variety of interesting effects possible, OASE's
Residential Spray Rings offer the same tranquility and
soothing class of our Architectural Spray Rings, in a low-cost version for
residential and interior use. This model is also
available in a double ring configuration that provides its own center feed
point.
Spray rings have
been a mainstay of fountain design, usually when coupled with a cascade nozzle
or statuary center piece,
and are the perfect choice to fill a particular pool since they
can be configured to spray from the edge to the center, containing
splash within the pool itself.
Similar to our
Architectural Spray Ring in effect appearance, Residential models are machine
manufactured circular copper tubes
fitted with swaged tube nozzles. Each of these provide a clear
stream jet, offering the homeowner a large, pleasing display with
minimal water consumption. Each swaged tube nozzle is
adjustable via an annealed copper tube stem giving you the precise
aiming necessary for a perfect, exacting appearance.
Further, double ring configurations let you achieve several eye-catching
effects. For example, the inner ring can be aimed toward
the center and the outer ring outward, creating a centerpiece
effect. Or, aim both outward for a two tiered effect, or aim them
both in opposite directions for a spiraling, basket weave
effect. The choices are yours.
Technical Description:
- Architectural Spray
Rings are equipped with Comet nozzles, which are adjustable smooth
bore nozzles with straightening
vanes.
- Architectural Spray
Rings are water level independent and can be located in
"dry" areas. Ideally the spray ring is
mounted in a pool or body of water, with the center of the ring at
water level.
- Architectural Spray Rings are
equipped with several inlet ports depending on the size and model.
These ports are all female NPT threads. All ports should be fed
with equal flow and pressure, as the ring is designed to equalize nozzle
pressures only between feeds.
- Architectural Spray
Rings are equipped with rigid copper (or other special material)
legs and are delivered cut to a
ring tube center to ground distance of 24". These legs can
be cut down to provide a ring height of 18", or be set into
the pool floor by drilling and epoxy. The legs fit into sockets
on the bottom of the ring and are through-bolted in place.
- Custom sized legs
or special configurations are available.
- Bottom drains are
provided for winterizing.
- 20 standard sizes
of architectural spray rings made of copper are available.
|
|
Français