|
Description:
OASE's
Architectural Spray Bar is the ultimate compliment to high-end fountain or
pool installations, lending the feel of regal,
stately elegance. Made of a copper (or other special
material) tube fitted with Comet nozzles that each provide a clear stream
jet, the effect is a dancing, symmetrical display with
minimal water consumption. Spray bars are popular elements in fountain
design, usually when coupled with a cascade nozzle or
statuary center piece or along the sides of narrow, long fountains.
They're the perfect choice to fill a particular pool
since they can be configured to spray from the edge to the center,
containing
splash within the pool itself. Each Comet nozzle is
adjustable 24° (12° off center) giving you the precise aiming necessary
for a
perfect, exacting appearance.
Technical description:
- Architectural Spray Bars
are equipped with Comet nozzles, which are adjustable smooth bore
nozzles with straightening vanes.
- Architectural Spray Bars
are water level independent and can be located in "dry" areas.
Ideally the spray bar is mounted in a pool or body of water, with the center of the bar at water level.
- Architectural Spray Bars
are equipped with several inlet ports depending on the size and model.
These ports are all female NPT threads. All ports should be fed with
equal flow and pressure, as the bar is designed to equalize nozzle
pressures only between threads.
- Architectural Spray Bars
are equipped with rigid copper (or other special material) legs and are
delivered cut to a tube
center to ground distance of 24". These
legs can be cut down to provide a ring height of 18", or be set
into the pool floor by
drilling and epoxy. The legs fit into sockets on
the bottom of the bar and are through-bolted in place.
- Custom sized legs or
special configurations are available.
- Bottom drains are
provided for winterizing.
- 20 standard sizes of
Architectural Spray Bars made of copper are available.
|
Français